GPL-X1800/1600 Vertical Glass Wash Machine
Machine introduction
The cleaning box is made of thick stainless steel integrally welded to ensure high strength and no deformation: the bottom plate is 5mm thick stainless steel plate; the top is 3mm thick stainless steel plate; the side and middle partitions are 2mm stainless steel plate.
Two-stage cleaning + three-stage spraying + independent water spraying room, the glass is cleaned clean and fast.
The unique circulating windshield drying system is energy-saving and low-noise (the wind temperature can reach 40 degrees without heating in winter).
Parameters
|
Model |
GPL-X1600 |
GPL-X1800 |
|
Input Voltage |
380V 50Hz |
380V 50Hz |
|
Total Power |
10KW |
15KW |
|
Cutting Glass Size |
1600×2500mm |
1800×2500mm |
|
Min Glass Size |
300×450mm |
300×450mm |
|
Glass Thickness |
4-10mm |
4-10mm |
|
Working Speed |
4-6m/min |
6-10m/min |
|
Total Weight |
1500kg |
2500kg |
|
Size of Line |
6500×2350×2280mm |
7000×2350×2480mm |
Related products
-
-
-
-
-
-
-
-
-
-
GPL-X2500/2000 Vertical Glass Wash MachineThe distance of the wind knife can be adjusted freely according to the thickness of the glass. The air drying box and the fan circulating air device, without heating the air knife, the temperature can freely reach about 40 ℃, and the glass cleaning effect is better. The cleaning box, air drying box, air knife, etc. are all made of stainless steel, beautiful in appearance and never rusty. Six extra-grade brushes. -
GPL-HX2500/2000 Vertical Glass Wash MachineThe cleaning box is integrally welded with thick stainless steel, with high strength and no deformation: the top is stainless steel plate plus 12mm thickened steel plate; the bottom is 5mm thick stainless steel plate, and the side and middle partitions are 2mm stainless steel plate; (Level 3) Six high temperature resistant wire brushes with diameter of 180mm + four sprays, the glass is cleaned and the speed is fast (10-12m per minute). -
GPL-X1800/1600 Vertical Glass Wash MachineThe cleaning box is made of thick stainless steel integrally welded to ensure high strength and no deformation: the bottom plate is 5mm thick stainless steel plate; the top is 3mm thick stainless steel plate; the side and middle partitions are 2mm stainless steel plate. -
WH2500H / 2000H / 1800H High Speed Glass Cleaning Process MachineWH-H series of horizontal washing machines, can be equipped with pretreatment for temper furnace, laminated and insulating glass furnace, all stainless steel clean room, drying room, water tanks, pumps,air knife, water pipe, cover, fan housing etc., ensure machine durable, not rust. -
BXJ1600 Glass Washing & Drying MachineWH-H series of horizontal washing machines, can be equipped with pretreatment for temper furnace, laminated and insulating glass furnace, all stainless steel clean room, drying room, water tanks, pumps,air knife, water pipe, cover, fan housing etc., ensure machine durable, not rust. -
ZXM2500/2000-CNC Drilling / Milling / Grinding Machining CenterThe machine is a multi-axis and servo multi-function glass processing center, which can havedrilling and milling process.Grinding edges (optional) etc. The equipment is the vertical design, floor space is small, User-friendly interface, easy to operate and high accuracy keep safe for glass. lt can make all kinds of pictures according to the customer's needs, include the glass, bath-room door, glass curtain wall, stair glass, furniture Glass, automobile glass, electrical glassand other comprehensive processing. -
GLMC2500/2000-CNC Full Automatic CNC Verticale Four Sides Edge Delete MachineThis product is a vertical seven axis servo CNC edging, used for pretreating insulated glassprocess line and temper glass process line. Using a diamond abrasive head, chamfering smooth and delicate, no violent side, high output rate. No need to input the glass size, the system can automatically identify the glass size. Especially for LOW-E glass edging, the use of vacuum suction cups fixed rear glass, nonco-ntact front surface, can prevent scratch the glass membrane surface. -
RZB02-CNC Automatic Coordinate Glass Load and Unload RobotThis machine is mainly used for glass handling work during glass production, with asimple structure，reliable operation (three runs direction under advanced servo control), and high efficiency.Especially when handling larger glass, greatly reducethe labor intensity of workers，while protecting the operator's personal safety andavoid personal injury, lower production costs. -
ZW-CNC Automatic Spacer Bending MachinePLC control system, friendly interface, easy operation. Servo motors control feeding system. Any width spacer can be bended. 4 group size magazines of spacer. Support different shape continuous bending. Big size aluminum frame, bending auxiliary function. Bending lateral adopts split stainless steel shield. Spacer automatic welding function. Spacer welding place avoiding. -
Drying Agent Filling MachineBy PLC control for the bending aluminum frame designed, filling in confinedconditions, solve the problem of steam absorption of the molecular sieve,improve efficiency and lifetime of insulating glass. It is the necessary equip-ment for insulating glass making. -
Online Message
If you are interested in our products, please fill in the following form and we will contact you in time!
Marketing Center (CHINA)
Add: No. 1, Zheng'an Road, Taiwan Industrial Park, Jibei Development Zone, Jinan
TEL：0086-531-88260988 0086-531-88260788
FAX：0086-531-88260988
E-mail：muyang@sdmysy.com
Overseas business department
(Overseas)
TEL：0086-531-82632688
FAX：0086-531-88260988
E-mail：muyang@sdmysy.com
WeChat official account
0086-531-82632688
Feedback 
Copyright © 2021 Shandong Muyang Industrial Co., Ltd 鲁ICP备15017760号-1 Powered by：WWW.300.CN JINAN2