DKJ2536/1825-L6 CNC Automatic Glass Punching Line
Key words:
Category:
Service Hotline:
Email:
Description
Product Introduction
The vertical glass drilling machine can be used in conjunction with the glass washing machine and the glass upper and lower sheet machine to improve production efficiency.
Introduction to Glass Drilling Machine
1. The glass drilling machine is designed with 4 heads, allowing simultaneous drilling from the front and back, resulting in high drilling quality and minimal chipping.
2. It can process two holes simultaneously, doubling the efficiency compared to a two-head drilling machine.
3. Laser sensor positioning, with an accuracy of ±0.2mm.
4. A glass beveling tool can be installed on the cutter, achieving beveling while drilling the glass.
5. PLC control, with a simple and practical operating interface, high program reliability, making it an efficient glass drilling device.
Introduction to Glass Washing Machine
1. Six high-temperature resistant 180mm diameter brushes + four spray nozzles ensure thorough cleaning of the glass, with variable speed control (8-15m per minute). The uniquely designed spray system allows for adjustable spray angles, making cleaning and maintenance quick and convenient. The washing machine's water tank is equipped with a water heating system, recommended for use when the room temperature is ≤7°.
2. Fatigue-resistant stainless steel springs automatically adjust cleaning based on glass thickness (4-17mm) during the glass transmission process.
3. The entire washing machine is designed with thick three-layer stainless steel, with the cleaning box consisting of a 6MM upper top plate, a 6MM lower bottom plate, and a 4MM lower waterproof plate. The glass is fed by the upper top plate, and the brush drive roller is fixed by self-aligning bearings on the upper top plate and lower bottom plate. The brush bearings have a long service life and are easy to maintain and replace. The glass waterproofing is achieved through a fully sealed structure of the lower waterproof plate, ensuring the machine never leaks.
4. The washing machine's brushes use a vertical motor, providing smooth transmission and strong power.
5. The upper transmission part of the washing machine uses a key pin gear transmission, which is stable, durable, and maintenance-free for life (only requires lubrication). (Some manufacturers use old chain transmissions, which are noisy, prone to failure, and difficult to maintain.)
6. The European-style high-pressure blower is equipped with a heating box at the air inlet, ensuring better drying effects in winter. The unique internal circulation drying system is energy-efficient, low noise, and avoids secondary air pollution (in winter, the air temperature can reach 40 degrees without heating).
7. National patented dual air knife washing machine, ensuring that the washed glass is clean and streak-free.
Equipment Parameters
|
Model |
Power Supply |
Power |
Maximum Processing Size |
Minimum Processing Size |
Thickness of Raw Glass |
Drilling Diameter |
Dimensions |
|
DKJ1825-L6 |
380V 50Hz |
13kw |
1800×2500mm |
350×350mm |
4-19mm |
Ø5-ø50 |
13200x2000x3400mm |
|
DKJ2536-L6 |
380V 50Hz |
13kw |
2500×3660mm |
350×350mm |
4-19mm |
Ø5-ø50 |
18500x2000x4400mm |
Product recommend
Product display
Marketing Center (Domestic)
Address: No. 18, Zhengan North Road, Taiwan Industrial Park, Jibei Development Zone, Jinan
Telephone:86-531-88260988 88260788
Fax:86-531-88260988
E-mail:muyang@sdmysy.com
Overseas Business Department (Abroad)
TEL:86-531-82632688
FAX：86-531-88260988
E-mail：muyang@sdmysy.com